American elm. by rob johnstone • sep 25, 2018. print. print. recently, we shot a video where i turned a small canister from green wood. (the video will be distributed in the middle of october.) to get a few big chunks of green hardwood for the video, i haunted some yard waste drop-off centers and pounced when i spied four approximately 15-in. American elm is a tough and durable hardwood. the color of the heartwood ranges from light tan to warm brown with creamy, light sapwood. it has an attractive grain that resembles ash.. 1/4 sawn american elm will be more stable, but not much different looking than flat sawn except the grain will be straight down the length of the board instead of showing on the face.like this. this would be flat sawn, i personally prefer this..
Milling chinese elm is easy, a mix of 4/4-a little 6/4 and some 8/4. it's pretty wood really. it is a little more difficult to dry. it likes to move (cup, twist) so it should be weighed down in the stack.. Later, with the advent of mechanical sawing, american elm wood was used for barrel staves, trunk-slats, and hoop-poles, and subsequently became fundamental to the manufacture of wooden automobile bodies, with the intricate fibers holding screws unusually well. pioneer and traditional uses. Both hard and soft elm types are available such as cedar, winged, and rock elm falls under hard type whereas, as the american, wych, english, red, dutch, etc. is elm wood good for furniture? the elmwood is the most popular choice for furniture making as it is widely used in contemporary furniture heritage manufacturing..
0 komentar:
Posting Komentar